Edison ECNR100 ECNR Current Limiting Time Delay Fuse, 100 A, 250 VAC, 200 kA Interrupt, Class RK5, Bullet/Cylindrical Body
Class RK5 Fuses
990931
MFG #: ECNR100
Bussmann
103.15000
/ ea
- Alternate Catalog Number: ECNR100
- Application: Ind Facilities & Factories - Facility: Safety and Security Systems
- ARRA Compliant: C
- Body Size: 1.06 in Dia x 5.88 in L
- Buy American Compliant: C
- Catalog Number: ECNR100
- Connection: Blade end x blade end
- Country of Origin: MX
- Currency: USD
- Element: Dual
- EU RoHS Indicator: C
- Gross Weight Per Pack: 0.3000 lb
- Gross Weight per Pack Metric: 0.39
- Gross Weight UOM Metric: kg
- Harmonization Tariff Schedule Code: 8536100040
- Height: 5.88 in
- Height [Metric]: 14.9352 cm
- Length: 7.13 in
- Length [Metric]: 18.1102 cm
- Material: Fiberglass
- Response Time: 10 S at 500%
- Returnable: Y
- Series: ECNR
- Size: 1.06 In Diameter X 5.88 In Length
- Standard: CE Marked
- Standards: ARRA CompliantBuy American Act CompliantRoHS CompliantUL 248-12 File No. E162363 Class RK-5 Guide JDDZCE CertifiedCSA File No. 700489 C22.2 No. 248.12 Class 1422-02
- Sub Brand: Edison
- Terminal Type: Blade End x Blade End
- Type: Fuse
- UNSPSC: 39121606
- UPC 11: 78263450743
- UPC 12: 782634507437
- Width: 1.60 in
- Width [Metric]: 4.0640 cm
- Stock Status: NONSTOCK
- Brand: Bussmann
- Manufacturer: Eaton
- Amperage Rating: 100 A
- Class: RK-5
- Interrupt Rating: 200 kAIC
- Voltage Rating: 250/125 VAC//VDC
These fuses are recommended for AC power distribution system mains, feeders and branch circuits having inductive loads (motors, transformers) or non-inductive loads (lighting, heating) where the available short circuit current does not exceed 200,000 RMS symmetrical amperes. These "dual element, time-delay fuses have minimum industry standard time-delay of 10 seconds at 5 times the fuse rating (8 sec. minimum for 250V, 30A and less). The time-delay characteristics of these fuses typically allows them to be sized closer to the running ampacity of inductive loads to reduce cost and provide improved over current protection. These fuses will override normal equipment current surges to reduce unnecessary fuse openings. They are the most popular fuses used in the industry and the most economical for most applications, especially motors and transformers. They have moderate current limitation.
- Brochure URL - EDIFUSE00004_1-5.pdf(Brochure URL)
- Catalog URL - IDW_DOCUMENT_5d929b8d4715950649be1de2795cb103eb22e5483a04181d863cebf01e91b4ce.pdf(Catalog URL)
- http://www.bussmann.com(Seller Home Page URL)
- Spec Sheet 1 URL - Edison_ECSR60_Specification_Sheet_1.pdf(Spec Sheet 1 URL)
- Spec Sheet 2 URL - Edison_ECNR100_Specification_Sheet_2.pdf(Spec Sheet 2 URL)
- Spec Sheet URL - 10973_S5XDY1HECFVW7JRA.pdf(Spec Sheet URL)
- Video - https://www.youtube.com/embed/YMvqUyoETXk(Video)
- Applications
- Features
| Ind Facilities & Factories - Facility: Safety and Security Systems |
| Non current limiting |
| Provides motor overload, ground fault and short circuit protection |
| Helps protect motors against burnout from overloads and single phasing when sized properly |
| Simplifies and improves blackout prevention (selective coordination ratios) |
| Dual element fuses can be applied in circuits subject to temporary motor overloads and surge currents to provide both high performance short circuit and overload protection |
| The overload element provides protection against low level over current of overloads and will hold an overload which is five times greater than the amperage rating of the fuse for a minimum of 10 sec |
| Simplifies and improves blackout prevention (selective coordination) |
| Dual-element fuses can be applied in circuits subject to temporary motor overloads and surge currents to provide both high performance short circuit and overload protection |
| Overload element provides protection against low level over current of overloads and will hold on inrush current which is five times greater than the amp rating of the fuse for a minimum of ten seconds |