Banner Engineering SME312FPQD Mini-Beam® Expert™ SME312 Fiber Optic Sensor, Rectangle Shape, Visible Red Sensing Beam

Fiber Optic Block Style Sensors
128144 MFG #: SME312FPQD
Banner®
174.94000 / ea
Banner_SME312FP
  • Amperage Rating: 45 mA
  • Catalog Number: SME312FPQD
  • Connection Type: Quick Disconnect
  • Country of Origin: US
  • Enclosure Type: NEMA 1/2/3/3S/4/4X/6/12/13/IP67
  • Environmental Conditions: 90% at 50 deg C
  • Gross Weight Per Pack: 0.2200 lb
  • Light Source: LED
  • Operating Temperature: -20 to 70 °C
  • Series: SME312
  • Size: 76.2 mm L x 12 mm W x 30.7 mm H
  • Standards: CE Marked, CSA Certified, cULus Listed
  • UNSPSC: 41112103
  • UPC 11: 66248853732
  • UPC 12: 66248853732
  • Voltage Rating: 10 to 30 VDC
  • Stock Status: NONSTOCK
  • Brand: BANNER®
  • Manufacturer: Banner Engineering Corp.
  • Output Type: Bi-Polar NPN/PNP
  • Response Time: 0.5 ms
  • Sensing Beam: Visible Red
  • Shape: Rectangle
Banner Engineering Mini-Beam® Expert™ Fiber Optic Sensor, Series: SME312, Rectangle, Visible Red Sensing Beam, 0.5 ms Response, Bi-Polar NPN/PNP Output, 10 to 30 VDC, 45 mA, Quick Disconnect, LED Light Source, 76.2 mm L x 12 mm W x 30.7 mm H, NEMA 1/2/3/3S/4/4X/6/12/13/IP67, -20 to 70 deg C Operating, Environmental Conditions: 90% at 50 deg C
QTY
Add to Wishlist
  • Features
Remote teach-mode input is provided
Less than 5 uA at 30 VDC off-state output leakage, less than 45 mA
Sensors will respond to either a light or a dark signal of 0.5 ms or longer duration, 1 kHz max
650 nm visible red LED sensing beam
Acrylic lens, 90 percent at 50 deg C (non-condensing) relative humidity
5-pin euro-style quick disconnect connection
100 ms repeatability
Less than 1 V at 10 mA and 2 V at 150 mA (PNP), less than 200 mV at 10 mA and 1 V at 150 mA (NPN) output saturation voltage
150 mA maximum at 25 deg C derated to 100 mA at 70 deg C
Light/dark operate, bipolar (NPN and PNP) control output
Reinforced thermoplastic polyester housing
1 sec delay at power-up
Plastic fiber
Adjustments - push-button teach-mode sensitivity setting, remote teach-mode input is provided
(2) LEDs, yellow and bicolor green/red
Stainless steel screws
Protected against reverse polarity and transient voltages
Protected against false pulse on power-up and continuous overload or short-circuit of outputs