Rees 04957-012 Flat Square Heavy Duty Non-Illuminated Pushbutton, 2-3/4 in, #64 2NO/2NC, Snap Acting Contact
Non-Illuminated Pushbuttons
11918
MFG #: 04957012
REES
591.98000
/ ea
- Actuator: Plunger
- Bezel|Housing: Die Cast Zinc
- Catalog Number: 04957012
- Contact Mode: Momentary
- Contact Rating: 6 A at 110 to 120 VAC, 3 A at 220 to 240 VAC, 1.55 A 440 to 480 VAC, 1.2 A 550 to 600 VAC, 2.2 A at 115 to 125 VDC, 1.1 A at 230 to 250 VDC
- Country of Origin: USA
- Enclosure Type: NEMA 12/13/IP65
- Environmental Conditions: -32 to 131 deg F Operating, -40 to 185 deg F Ambient
- Finish: Dry Powder Coated
- Gross Weight Per Pack: 1.3500 lb
- Material: Plastic
- Terminal Type: 14 AWG Stranded Wire
- Type: Flat Square Heavy Duty
- UNSPSC: 39122216
- UPC 11: 64867149572
- UPC 12: 64867149572
- Stock Status: NONSTOCK
- Brand: REES
- Manufacturer: Rees, Inc.
- Color: Chrome/Yellow
- Contact Configuration: 2NO-2NC
- Contact Type: Snap Action
- Operator Type: Hand
- Size: 2-3/4 In
REES Non-Illuminated Pushbutton, Flat Square Heavy Duty, 2-3/4 in, #64 2NO/2NC, Snap Acting Contact, Momentary Contact Mode, 6 A at 120 VAC/1.1 A at 250 VDC Contact, Hand Operator, Plunger, NEMA 12/13/IP65, Plastic, Dry Powder Painted, Chrome/Yellow, Environmental Conditions: -32 to 131 deg F Operating Temperature/-40 to 185 deg F Ambient Temperature
- Application GDE URL - REES_00222_002_Application_Guide.pdf(Application GDE URL)
- Catalog URL - IDW_DOCUMENT_8e9c1daf21a05138329eb17197525392d5d22c2ad9b1712f772727ae63217b5f.pdf(Catalog URL)
- http://www.reesinc.com/(Seller Home Page URL)
- Install Instructions URL - REES_00222_002_Installation_Instructions.pdf(Install Instructions URL)
- Owners Manual URL - REES_00222_002_Manual.pdf(Owners Manual URL)
- Spec Sheet URL - A%2004853-931_rev_B.pdf(Spec Sheet URL)
- Tech Drawing URL(Tech Drawing URL)
- Warranty URL - TermsPopup.aspx?cid=3969&plpver=10&pcat=&origin=Plp&lsid=50360424#TermsAndConditions(Warranty URL)
- Features
| The following switch is a hand operated, control circuit device, rated 'Heavy Duty - A600/N300' normally for use with electromagnetic equipment; The powder coat painted yellow cover and chrome plated flat plunger are made from die-cast zinc; Auxiliary rubber boot under plunger head; Low operating force - under 2 LB; Ergonomic design; Gold plated contacts eliminate high resistance tarnishing; Each captive terminal will accept (2) 14 AWG stranded wires; Each switch is supplied with all mounting hardware and a solid neoprene rubber gasket which provides an oil tight seal upon installation; Its rugged construction and long term reliability make this switch extremely well suited to function within various environments; Note: Operating temperatures at 0 DEG C are based on the absence of freezing moisture and liquids |