Maestro® Wireless® MRF2-8S-DV-IV MRF2-8S Specification Grade Wireless Electronic Switch, 120/277 VAC, 8 A, 1 Pole, Ivory
Dimmer Switches
PDW~6632943
MFG #: MRF2-8S-DV-IV
Lutron®
150.00000
/ ea
- Catalog Number: MRF2-8S-DV-IV
- Country of Origin: MX
- Dimensions: 4-11/16 in H x 2-15/16 in W x 1-1/8 in D
- Frequency Rating: 50/60 Hz
- Gross Weight Per Pack: 0.2500 lb
- Lamp Type: CFL/Fluorescent/Incandescent/LED/Halogen
- Number Of Poles: 1
- Power Rating: 25/40 W
- Series: MRF2-8S
- Standards: UL/cUL Listed (MRF2-6CL only, CSA Certified (except for MRF2-6CL) and FCC Approved
- Sub Brand: Maestro® Wireless®
- Temperature Rating: 0 to 40 °C
- Type: Specification Grade Wireless
- UNSPSC: 39122216
- UPC 11: 02755777544
- Stock Status: NONSTOCK
- Brand: Lutron®
- Manufacturer: Lutron Electronics Co., Inc
- Amperage Rating: 8 A
- Color: Ivory
- Voltage Rating: 120/277 VAC
The Maestro Wireless solution incorporates Maestro Wireless load controls, wireless sensors, and wireless remote controls, which provide a system that delivers energy savings, convenience, and ease of installation.
- http://www.lutron.com(Seller Home Page URL)
- Install Instructions URL - 031176D.pdf(Install Instructions URL)
- Spec Sheet URL - 369-143.pdf(Spec Sheet URL)
- Tech Drawing URL - wallbox_wiring_30.pdf(Tech Drawing URL)
- Video - https://www.youtube.com/embed/VQnBmbd9XF0(Video)
- Warranty URL - 369-119_Wallbox_Warranty.pdf(Warranty URL)
- Features
| Rated for 8 A incandescent/halogen, magnetic low-voltage, electronic low-voltage, LED/CFL, or fluorescent loads, or 3 A (1/10 HP) general purpose fans and motor loads 120 V only. Tap switch on/off. For multi-location switching, use one Maestro Wireless switch with companion switches or Pico wireless remotes. |
| Maestro® wireless solution provides dimming/ switching of multiple load types, occupancy/vacancy sensing, daylight harvesting, and high-end trim |
| Lutron® patented clear connect RF technology works through walls and floors |
| Incorporates advanced features such as fade ON/fade OFF, high-end trim and rapid full on |
| Controls include Front Accessible Service Switch (FASS) for safe lamp replacement |
| Two-wire dimmers and switches available for retrofit applications |
| Power failure memory if power is interrupted, the control will return to its previously set level prior to interruption |
| incandescent, halogen, MLV, ELV, non-dim fluorescent ballasts, does not require a neutral wire connection |
| Fan control |
| 1/10 HP motor |
| All lighting loads, motor loads |
| Automatic shut off |