Sandvik Coromant 6331999 CoroDrill® 800 Right Hand STS With Indexable Inserts, 1.0039 in, 1-1/4 in Dia Max Drill
Drill Heads
1228602
MFG #: 6331999
Sandvik Coromant
741.95000
/ ea
- Catalog Number: 6331999
- Country of Origin: DE
- Gross Weight Per Pack: 0.2200 lb
- Number of Non~Pilot Inserts: 85 mm
- Series: CoroDrill® 800
- Type: Right Hand STS
- UPC 11: 69826272751
- Stock Status: NONSTOCK
- Brand: Sandvik Coromant
- Manufacturer: Sandvik Coromant
- Back of Head Diameter: CoroDrill® 800
- Head Connection Size: 1.0039 in
- Head Length: Right Hand STS
- Insert Holding Method: 40 to 60 deg Screw Clamping
- Maximum Drill Diameter: 1-1/4 in
- Overall Length: 3.3464 in
- Pilot Drill Diameter: 40 - 60 deg Screw Clamping
- Pilot Drill Style: 85 mm
- Pilot Type: 25.5 mm
In deep hole machining, a combination of tool design and cutting fluid pressure is used to evacuate the chips out of the hole. Both the Single tube system and Ejector drill system can produce holes with excellent surface finish, close dimensional tolerance and concentricity. CoroDrill® 800 with central insert L-geometry adds to excellent chip formation and evacuation.
- Features
| SZ 06 STS head machine side compatibility |
| 800-06 T3 08M-C-G, 800-06 T3 08M-I-G, 800-08 T3 08H-P-G compatible inserts |
| Axial concentric coolant exit |
| 80.746 mm L functional |
| 80.746 mm overhang |
| 4.253 mm L point |
| 4000 r/min |
| 0.084 mm achievable hole tolerance |
| 800.20..D tool style |
| Excellent surface finish |
| Process security |
| Good concentricity |
| Excellent chip control and evacuation thanks to central insert L-geometry |
| Laser marking of code, dimension and tube range |
| Excellent chip control in both low and high feeds due to the coolant accelerator |
| Wide range of grades suitable for machining in all materials |
| Few inserts and support pad sizes cover the whole diameter range |
| 20 life cycle state |
| ANSI Code: 800.20-06D31.75 |
| ISO Code: 800.20-06D31.75 |