Sandvik Coromant 6351800 CoroDrill® 800 Right Hand STS With Indexable Inserts, 4.4488 in, 5.3149 in Dia Max Drill
Drill Heads
1228858
MFG #: 6351800
Sandvik Coromant
5278.78000
/ ea
- Catalog Number: 6351800
- Country of Origin: US
- Gross Weight Per Pack: 29.7000 lb
- Number of Non~Pilot Inserts: 270 mm
- Series: CoroDrill® 800
- Type: Right Hand STS
- UPC 11: 69826274134
- Stock Status: NONSTOCK
- Brand: Sandvik Coromant
- Manufacturer: Sandvik Coromant
- Back of Head Diameter: CoroDrill® 800
- Head Connection Size: 4.4488 in
- Insert Holding Method: 40 to 60 deg Screw Clamping
- Maximum Drill Diameter: 5.3149 in
- Overall Length: 10.6299 in
- Pilot Drill Diameter: 40 - 60 deg Screw Clamping
- Pilot Drill Style: 270 mm
- Pilot Type: 113 mm
In deep hole machining, a combination of tool design and cutting fluid pressure is used to evacuate the chips out of the hole. Both the Single tube system and Ejector drill system can produce holes with excellent surface finish, close dimensional tolerance and concentricity. CoroDrill® 800 with central insert L-geometry adds to excellent chip formation and evacuation.
- Features
| SZ 21 STS head machine side compatibility |
| 800-08 T3 08M-I-G, 800-12 T3 08M-C-G, 800-12 T3 08M-I-G, R424.9-1806 compatible inserts |
| 2.5 mm adjustment limit |
| Axial concentric coolant entry |
| Axial concentric coolant exit |
| 252.6 mm L functional |
| 134.6 mm overhang |
| 17.4 mm L point |
| 500 r/min |
| IT10 achievable hole tolerance |
| 801.20..D tool style |
| Excellent surface finish |
| Process security |
| Good concentricity |
| Excellent chip control and evacuation thanks to central insert L-geometry |
| Laser marking of code, dimension and tube range |
| Excellent chip control in both low and high feeds due to the coolant accelerator |
| Wide range of grades suitable for machining in all materials |
| Few inserts and support pad sizes cover the whole diameter range |
| 20 life cycle state |