Sandvik Coromant 5854768 CoroMill® 331 Side and Face Milling Insert, N331.1D-136508E-PM 3040 ANSI, S-Square, Carbide, 3040
N331 Milling Inserts
1248485
MFG #: 5854768
Sandvik Coromant
34.63000
/ ea
- Alternate Catalog Number: N331.1D-136508E-PM 3040
- ANSI Code: N331.1D-136508E-PM 3040
- Catalog Number: 5854768
- Corner Radius: 0.0314 in
- Country of Origin: SE
- Finish: MTCVD Coated
- Gross Weight Per Pack: 0.0300 lb
- Hand of Insert: Neutral
- Hole Diameter: 0.1712 in
- Included Angle: S - Square
- ISO Code: N331.1D-136508E-PM 3040
- Item Group: 350
- Lead Angle: 90 deg
- Length: 0.5275 in
- Material Application: Cast Iron
- Relief Angle: 6.55 mm
- Series: CoroMill® 331
- Thickness: 0.2578 in
- Type: Side and Face
- UPC 11: 69826251620
- Width: Side and Face
- Width UOM: IN
- Stock Status: NONSTOCK
- Brand: Sandvik Coromant
- Manufacturer: Sandvik Coromant
- Chipbreaker: PM
- Inscribed Circle: 0.5275 in
- Insert Size: Carbide
- Insert Style: N331.1D..E-PM
- Manufacturer's Grade: 3040
- Material: Carbide
- Material Grade: K
- Rake: Positive
- Shape: S-Square
Sandvik Coromant Milling Insert, Side and Face, Series: CoroMill® 331, N331.1D..E-PM Insert, S-Square, 0.5275 in Inscribed Circle, 0.2578 in Thickness, 0.5275 in Length, PM Chipbreaker, 0.0314 in Corner Radius, Positive Rake, 90 deg Lead Angle, 0.1712 in Hole Dia, Manufacturer's Grade: 3040, ANSI Code: N331.1D-136508E-PM 3040, ISO Code: N331.1D-136508E-PM 3040, Neutral Hand, Carbide, MTCVD Coated, Material Grade: K
- Features
| 40 to 60 deg countersunk hole and non-flat surface clamping interface |
| 0 deg clearance |
| 11.4 mm D cutting |
| 1.2 mm L wiper edge |
| 90 deg included |
| 88 deg major cutting edge |
| 11.4 mm L effective cutting edge |
| 2-side cutting |
| 20 life cycle state |
| 4 corner |
| E cutting edge condition |
| 8 cutting edge |
| Screw clamp mounting |
| 0.1 to 0.29 mm/r cutting feed |