Valenite Tiger-tec® Silver 7054177 Positive Single Sided Turning Insert, DCMT3(2.5)2-MM4 WSM30S ANSI, Rhombic
DCMT Turning Inserts
PDW~12584018
MFG #: DCMT3(2.5)2-MM4WSM30S
Walter (Valentine)
15.30000
/ ea
- ANSI Code: DCMT3(2.5)2-MM4 WSM30S
- Catalog Number: DCMT3(2.5)2-MM4WSM30S
- Corner Radius: 0.8 mm
- Finish: PVD-TiAlN+Al2O3 (ZrCN) Coated
- Gross Weight Per Pack: 0.0100 lb
- Hole Diameter: 0.17 in
- Included Angle: 55 °
- ISO Code: DCMT11T308-MM4 WSM30S
- Relief Angle: 7 °
- Series: Tiger-tec® Silver
- Sub Brand: Tiger-tec®
- Thickness: 3.97 mm
- Stock Status: NONSTOCK
- Brand: Walter (Valentine)
- Manufacturer: Walter
- Chipbreaker: MM4
- Cutting Direction: Neutral
- For Use On: Stainless Steel, High Temperature Alloys and Titanium
- Inscribed Circle: 9.525 mm
- Insert Size: 3(2.5)2
- Insert Style: DCMT
- Manufacturer's Grade: WSM30S
- Material: Carbide
- Material Grade: M, S
- Maximum Depth of Cut: 3 mm
- Rake: Positive
- Seat Size: 11
- Shape: Rhombic
With Tiger-tec® Silver, Walter is offering a world first in coating technology for indexable inserts. The special aluminium oxide layer with optimized microstructure reduces wear during turning, milling and drilling operations and increases toughness and temperature resistance for significantly higher cutting data.
- Features
| U chipbreaker - good chip control at low feed rate and varied radial depth of cut with low cutting force |
| Suitable for automatic lathes |
| Low feed |
| Sharp edge |
| PR1225 grade superior wear and oxidation resistant MEGACOAT on micrograin carbide substrate |
| Light interrupted to interrupted cutting of stainless steel |
| 0.08 to 0.202 mm corner point tolerance |
| +/-0.13 mm thickness tolerance |
| 0.05 to 0.152 mm inscribed circle tolerance |
| 0.12 to 0.32 mm feed/rev |
| 11.6 mm cutting edge length |
| 11 deg rake |