Sandvik Coromant 6532330 T-Max® P Negative Basic Shape Turning Insert, SNMM 644-HR 4325, S-Square, SNMM Insert, 4325, Carbide
SNMM Turning Inserts
1239126
MFG #: 6532330
Sandvik Coromant
36.74000
/ ea
- Alternate Catalog Number: SNMM 644-HR 4325
- ANSI Code: SNMM 644-HR 4325
- Catalog Number: 6532330
- Corner Radius: 0.062 in
- Country of Origin: JP
- Finish: CVD-TiCN+Al2O3+TiN Coated
- For Use On: Cast Iron and Steel
- Gross Weight Per Pack: 0.6300 lb
- Hole Diameter: 0.312 in
- Included Angle: 90 °
- ISO Code: SNMM 19 06 16-HR 4325
- Item Group: 112
- Length: 3/4 in
- Relief Angle: 0 °
- Series: T-Max® P
- Thickness: 1/4 in
- Width: 3/4 in
- Stock Status: NONSTOCK
- Brand: Sandvik Coromant
- Manufacturer: Sandvik Coromant
- Chipbreaker: HR
- Cutting Direction: Neutral
- Inscribed Circle: 3/4 in
- Insert Size: 644
- Insert Style: SNMM
- Manufacturer's Grade: 4325
- Material: Carbide
- Material Grade: K, P
- Maximum Depth of Cut: 0.512 in
- Rake: Negative
- Seat Size: 19
- Shape: Square
Sandvik Coromant Turning Insert, Negative Basic Shape, Series: T-Max® P, SNMM Insert, S-Square, 13 mm Maximum Depth of Cut, 3/4 in Inscribed Circle, 1/4 in Thickness, 3/4 in Length, HR Chipbreaker, 0.0624 in Corner Radius, 0.312 in Hole Dia, Manufacturer's Grade: 4325, ANSI Code: SNMM 644-HR 4325, ISO Code: SNMM 19 06 16-HR 4325, 90 deg Included Angle, 0 deg Relief Angle, Neutral Hand, Carbide, MTCVD Coated, Material Grade: K/P
- Features
| T9325 grade functionally gradient substrate |
| Relatively low content of cobalt binder phase |
| Highly versatile material with very good operational reliability |
| Medium and higher cutting speed |
| Special surface finish for coating |
| Continuous and interrupted cut |
| Rounded edge |
| 20 life cycle state |