Sandvik Coromant 6532334 T-Max® P Negative Basic Shape Turning Insert, SNMM 866-HR 4325, S-Square, SNMM Insert, 4325
SNMM Turning Inserts
1239087
MFG #: 6532334
Sandvik Coromant
82.14000
/ ea
- Alternate Catalog Number: SNMM 866-HR 4325
- ANSI Code: SNMM 866-HR 4325
- Catalog Number: 6532334
- Corner Radius: 0.094 in
- Country of Origin: SE
- Finish: CVD-TiCN+Al2O3+TiN Coated
- For Use On: Cast Iron and Steel
- Gross Weight Per Pack: 0.8600 lb
- Hole Diameter: 0.359 in
- Included Angle: 90 °
- ISO Code: SNMM 25 09 24-HR 4325
- Item Group: 112
- Length: 1 in
- Relief Angle: 0 °
- Series: T-Max® P
- Thickness: 3/8 in
- Width: 1 in
- Stock Status: NONSTOCK
- Brand: Sandvik Coromant
- Manufacturer: Sandvik Coromant
- Chipbreaker: HR
- Cutting Direction: Neutral
- Inscribed Circle: 1 in
- Insert Size: 866
- Insert Style: SNMM
- Manufacturer's Grade: 4325
- Material: Carbide
- Material Grade: K, P
- Maximum Depth of Cut: 0.669 in
- Rake: Negative
- Seat Size: 25
- Shape: Square
Sandvik Coromant Turning Insert, Negative Basic Shape, Series: T-Max® P, SNMM Insert, S-Square, 17 mm Maximum Depth of Cut, 1 in Inscribed Circle, 3/8 in Thickness, 1 in Length, HR Chipbreaker, 0.0937 in Corner Radius, 0.359 in Hole Dia, Manufacturer's Grade: 4325, ANSI Code: SNMM 866-HR 4325, ISO Code: SNMM 25 09 24-HR 4325, 90 deg Included Angle, 0 deg Relief Angle, Neutral Hand, Carbide, MTCVD Coated, Material Grade: K/P
- Features
| T9325 grade functionally gradient substrate |
| Relatively low content of cobalt binder phase |
| Thick MT-CVD coating |
| Highly versatile material with very good operational reliability |
| Special surface finish for coating |
| Medium and higher cutting speed |
| Continuous and interrupted cut |
| Unfavorable cutting conditions, continuous and/or interrupted cuts |
| Cutting geometry suitable for grooving and axial turning |
| Suitable for turning, with an indexing accuracy to ISO tolerance class-M and chipbreakers on one side only |