Sandvik Coromant 5752344 CoroTurn® 107 1-Sided Turning Insert, TCGT 221L-K 1025, T-Triangle, TCGT-R/L-K Insert, 1025
TCGT Turning Inserts
1233753
MFG #: 5752344
Sandvik Coromant
17.45000
/ ea
- ANSI Code: TCGT 221L-K 1025
- Catalog Number: 5752344
- Corner Radius: 0.0156 in
- Country of Origin: SE
- Finish: PVD Coated
- Gross Weight Per Pack: 1 lb
- Hand of Insert: Left
- Hole Diameter: 0.1102 in
- Included Angle: 60 deg
- ISO Code: TCGT 11 03 04L-K 1025
- Length: 0.4228 in
- Relief Angle: 7 deg
- Series: CoroTurn® 107
- Thickness: 1/8 in
- Type: 1-Sided
- UPC 11: 69826227873
- Width: 7 deg
- Stock Status: NONSTOCK
- Brand: Sandvik Coromant
- Manufacturer: Sandvik Coromant
- Chipbreaker: K
- Cutting Direction: Left Hand
- For Use On: Cast Iron, Stainless Steel, Non-Ferrous Metals, Steel, Heat-Resistant Super Alloys and Titanium
- Inscribed Circle: 1/4 in
- Insert Size: 10.74 mm
- Insert Style: TCGT-R/L-K
- Manufacturer's Grade: 1025
- Material: Carbide
- Material Grade: M/S
- Maximum Depth of Cut: 0.5 mm
- Rake: Positive
- Seat Size: 11
- Shape: T-Triangle
Sandvik Coromant Turning Insert, 1-Sided, Series: CoroTurn® 107, TCGT-R/L-K Insert, T-Triangle, 0.5 mm Maximum Depth of Cut, 1/4 in Inscribed Circle, 1/8 in Thickness, 0.4228 in Length, K Chipbreaker, 0.0156 in Corner Radius, 0.1102 in Hole Dia, Manufacturer's Grade: 1025, ANSI Code: TCGT 221L-K 1025, ISO Code: TCGT 11 03 04L-K 1025, 60 deg Included Angle, 7 deg Relief Angle, Left Hand, Carbide, PVD Coated, Material Grade: M/S
- Features
| 7 deg major clearance |
| F cutting edge condition |
| 3 cutting edges |
| 40 - 60 deg countersunk hole and non-flat surface clamping interface |
| 10.34 mm L effective cutting edge |
| G tolerance class |
| 0.03 - 0.25 mm/r cutting feed |
| 30 life cycle state |
| Sharp cutting edges and excellent chip control ensure a soft cutting action and low cutting forces, providing an excellent surface finish to the component |
| 7 deg clearance angle |
| Screw clamping ensures stability and unobstructed chip flow |
| Holders and insert geometries with conventional and CoroTurn HP design |
| For longitudinal turning and profiling |
| Positive rake |
| Screw clamp mount |