Sandvik Coromant 5751933 CoroTurn® 107 1-Sided Turning Insert, TCMT 2(1.5)0-UF 1025, T-Triangle, TCMT-UF Insert, 1025
TCMT Turning Inserts
1233517
MFG #: 5751933
Sandvik Coromant
11.71000
/ ea
- ANSI Code: TCMT 2(1.5)0-UF 1025
- Catalog Number: 5751933
- Corner Radius: 0.0078 in
- Country of Origin: SE
- Finish: PVD Coated
- Gross Weight Per Pack: 1 lb
- Hand of Insert: Neutral
- Hole Diameter: 0.1102 in
- Included Angle: 60 deg
- ISO Code: TCMT 11 02 02-UF 1025
- Length: 0.4228 in
- Relief Angle: 7 deg
- Series: CoroTurn® 107
- Thickness: 0.0937 in
- Type: 1-Sided
- UPC 11: 69826273419
- Width: 60 deg
- Stock Status: NONSTOCK
- Brand: Sandvik Coromant
- Manufacturer: Sandvik Coromant
- Chipbreaker: UF
- Cutting Direction: Neutral
- For Use On: Cast Iron, Stainless Steel, Non-Ferrous Metals, Steel, Heat-Resistant Super Alloys and Titanium
- Inscribed Circle: 1/4 in
- Insert Size: TCMT-UF
- Insert Style: TCMT-UF
- Manufacturer's Grade: 1025
- Material: Carbide
- Material Grade: M
- Maximum Depth of Cut: 0.4 mm
- Rake: Positive
- Seat Size: 11
- Shape: T-Triangle
Sandvik Coromant Turning Insert, 1-Sided, Series: CoroTurn® 107, TCMT-UF Insert, T-Triangle, 0.4 mm Maximum Depth of Cut, 1/4 in Inscribed Circle, 0.0937 in Thickness, 0.4228 in Length, UF Chipbreaker, 0.0078 in Corner Radius, 0.1102 in Hole Dia, Manufacturer's Grade: 1025, ANSI Code: TCMT 2(1.5)0-UF 1025, ISO Code: TCMT 11 02 02-UF 1025, 60 deg Included Angle, 7 deg Relief Angle, Neutral Hand, Carbide, PVD Coated, Material Grade: M
- Features
| 7 deg major clearance |
| E cutting edge condition |
| 3 cutting edges |
| 40 - 60 deg countersunk hole and non-flat surface clamping interface |
| 10.54 mm L effective cutting edge |
| M tolerance class |
| 0.05 - 0.15 mm/r cutting feed |
| 30 life cycle state |
| Sharp cutting edges and excellent chip control ensure a soft cutting action and low cutting forces, providing an excellent surface finish to the component |
| 7 deg clearance angle |
| Screw clamping ensures stability and unobstructed chip flow |
| Holders and insert geometries with conventional and CoroTurn HP design |
| For longitudinal turning and profiling |
| Positive rake |
| Screw clamp mount |