Fluke® VolTect™ 8808A120V Digital Bench Multimeter, 1000 VDC, 750 VAC, 10A, 100 MOhm, 750 VAC/1000 VDC, 10 A, 100 MOhm

Multimeters
745496 MFG #: 8808A 120V
Fluke®
1463.03000 / ea
11095_PIC_8808A_120V
  • Alternate Catalog Number: 2570235
  • Amperage Rating: 20m/200m/10 A
  • ARRA Compliant: C
  • Buy American Compliant: C
  • Catalog Number: 8808A 120V
  • Country of Origin: UKN
  • Currency: USD
  • Dimensions: 3.46 IN Height X 8.56 IN Width X 11.7 IN Depth
  • Diode Test: Yes
  • Display: VFD Multi Segment, Dual Readings
  • Display Type: VFD Multi Segment
  • EU RoHS Indicator: U
  • Frequency Rating: 20-1M Hz
  • Gross Weight Per Pack: 10.4700 lb
  • Gross Weight per Pack Metric: 4.75
  • Gross Weight UOM Metric: kg
  • Harmonization Tariff Schedule Code: 9030320000
  • Height: 11.02 in
  • Height [Metric]: 27.9908 cm
  • Interface: RS232, USB with Optional Adapter
  • Length: 16.14 in
  • Length [Metric]: 40.9956 cm
  • Measuring Range: 1000 VDC, 750 VAC, 10A, 100 MOhm
  • Model: 8808A
  • Peak Hold: Yes
  • Resistance: 200 OHM - 100 MOHM
  • Safety Rating: CAT I 1000 V, CAT II 600 V
  • Standard: UL 61010-1:2004, AN/CSA C22.2 No. 61010.1:2004, Designed To Comply With EN 61010-1:2001, ANSI/ISA 61010-1 (S82.02.01):2004
  • Standards: ANSI/ISA 61010-1 Certified, C22.2 No 61010.1- 2004 CSA Certified, UL 61010-1 - 2004 Listed
  • Temperature Rating: Operating: 0 - 50 DEG C, Storage: -40 To 70 DEG C °C
  • Type: Digital Multimeter
  • UNSPSC: 41113630
  • UPC 11: 09596934013
  • UPC 12: 095969340137
  • Voltage Rating: 750/1,000 VAC//VDC
  • Width: 14.17 in
  • Width [Metric]: 35.9918 cm
  • Stock Status: NONSTOCK
  • Brand: Fluke®
  • Manufacturer: Fluke Corporation
Fluke 8808A 5.5 digit multimeter has a broad range of functions, measuring volts, ohms and amps with a basic V dc accuracy of 0.01 %. It is remarkably easy to use, even by unskilled operators, because it makes the measurements you perform most often extremely easy and fast to do. Six setup buttons on the 8808A front panel operate like a car radio?s station presets. Simply set up the meter for a common measurement, then press shift followed by a setup button (S1 to S6) to save the setup. Now each time you perform that measurement, you simply press the appropriate setup key. It?s that easy.
QTY
Add to Wishlist
  • Features
Dedicated DC leakage current measurement; Six dedicated buttons for fast access to instrument setups; Hi/lo limit compare for pass/fail testing; Eliminate production mistakes; 2 X 4 OHM 4 wire measurement technique; Improve quality and efficiency in manufacturing test, R and D or service applications; Measure two parameters at once; Measure sensitive leakage current; Perform 4-wire measurements with only two leads; FlukeView forms basic; Fluke quality is built in; Simplified ASCII, Fluke 45 remote command emulation programming languages; Statement of calibration practices included
Fluke 45 remote command emulation
Basic VDC accuracy of 0.01 %
5.5 digit resolution dual display
Dedicated DC leakage current measurement
2 x 4 Ohms 4 wire measurement technique
Six dedicated buttons for fast access to instrument setups
High/low limit compare for pass/fail testing
Storage temperature - 40 to 70 deg C, peak hold, 100 samples/s with audible tone response time, 1.9999 V maximum reading, resolution- 0.1 mV fast rate
Threshold - 20 Ohm, test currents- 1 mA, maximum reading -199.99 Ohm, resolution - 0.01 Ohm, minimum/maximum, relative, hold, compare and dB functions
Designed to comply with EN 61010-1:2001, ANSI/ISA 61010-1 (S82.02.01):2004, UL 61010-1:2004, AN/CSA C22.2 No. 61010.1:2004
DC voltage range- 200 mV to 1000 V with accuracy of (0.015 + 0.003)
AC voltage range-200 mV to 750 V with accuracy of (0.2 + 0.05)
DC current range - 200 uA to 10 A with accuracy of (0.02 + 0.005)
AC current range- 20 mA to 10 A with accuracy of (0.3 + 0.06)
Resistance range- 200 to 100 MOhm with accuracy of (0.02 + 0.003)
Frequency range 20 Hz to 1 MHz with accuracy of 0.01%