- Alternate Catalog Number: 3078875
- Application: True RMS Utility Multimeter designed for basic electrical tests
- ARRA Compliant: C
- Battery: 9 Volt Alkaline, ANSI 1604A / IEC 6F22
- Battery Type: 9 VDC Alkaline ANSI 1604A/IEC 6F22
- Buy American Compliant: C
- Capacitance: 1000 nF / 10.00 µF / 100.0 µF / 9999 µF Farad
- Catalog Number: FLUKE-113
- Country of Origin: MY
- Currency: USD
- Dimensions: 6.58 x 3.35 x 1.81 in
- Diode Test: Yes
- Display: 3 3/4-digits, 6000 counts, updates 4/sec
- Display Type: Backlight/Digital
- Enclosure: Hard Plastic
- EU RoHS Indicator: U
- Gross Weight Per Pack: 0.0100 lb
- Gross Weight per Pack Metric: 0.00
- Gross Weight UOM Metric: kg
- Harmonization Tariff Schedule Code: 8504409550
- Height: 1.08 in
- Height [Metric]: 2.7432 cm
- Length: 0.63 in
- Length [Metric]: 1.6002 cm
- Material: Hard Plastic
- Measuring Range: 600 VDC/VAC, 60 kOhm
- Model: FLUKE 113
- Peak Hold: No
- Resistance: 600.0 O / 6.000 kO / 60.00 kO Ohm
- Safety Rating: CAT III 600 VAC/VDC, CAT IV 300 VAC/VDC Pollution deg 2
- Standard: Complies with ANSI/ISA 82.02.01 (61010-1) 2004, CAN/CSA-C22.2 No 61010-1-04, UL 61010-1 (2004) and IEC/EN 61010-1 2nd Edition for measurement Category III, 600 V, Pollution Degree 2, EMC EN61326-1
- Temperature Rating: -10 ?°C to 50 ?°C (14 ?°F to 122 ?°F) °F
- Type: Digital Multimeter
- UNSPSC: 41113630
- UPC 11: 09596943452
- UPC 12: 095969434522
- Voltage Rating: 6/60/600 V
- Width: 0.35 in
- Width [Metric]: 0.8890 cm
- Stock Status: NONSTOCK
- Brand: Fluke®
- Manufacturer: Fluke Corporation
Fluke 113 Digital Multimeter gives users the means to quickly and easily do basic meter set and reconnect testing. This meter is simple-to-use and has the features needed to repair most electrical problems. The Fluke 113 has significant improvements over other digital multimeters available on the market, including Fluke model 7-600. Using the Fluke VCHEK™ LoZ low impedance measurement function, users can simultaneously test for voltage or continuity. The Min/Max function lets you record signal fluctuations. The Fluke 113 can perform diode tests, and also provides both auto and manual ranging capabilities. With features such as conformance to the latest safety standards, backlight, and a much larger display that?s easier to view, this meter is a must have for every toolbox.
- Catalog URL - IDW_DOCUMENT_6fb566a93520b8e5cce3d74548067140c125abc6fb0817e9db76ca93923aed5b.pdf(Catalog URL)
- http://www.fluke.com(Seller Home Page URL)
- Install Instructions URL - ID-INS-FLUKE-113.pdf(Install Instructions URL)
- Owners Manual URL - 11095_2HYTEL57N930CIRM.pdf(Owners Manual URL)
- Spec Sheet URL - 11095_UZOT6JSAHGFDB2C4.pdf(Spec Sheet URL)
- Applications
- Features
| True RMS Utility Multimeter designed for basic electrical tests |
| VCHEK™ LoZ low impedance measurement function to simultaneously test for voltage or continuity |
| True-RMS for accurate AC measurements on non-linear loads |
| Large backlit display allows for easy visibility in low lit areas |
| Record signal fluctuations using the minimum maximum function |
| Diode test for testing general purpose germanium, silicon and power diodes |
| Integral holster with probe holders for easy storage |
| Auto and manual ranging for added user functionality |
| Meets measurement category CAT III 600 VAC and category IV 300 VAC standards for a higher level of safety |
| The optional TPAK magnetic hanger allows the user hands-free flexibility |
| 2% 3 (45 to 500 Hz), 4% 3 (500 Hz to 1 kHz) accuracy |
| Resistance range - 600 Ohm with accuracy of +/-(0.9% 2), 6 kOhm, 60 kOhm with accuracy of +/-(0.9% 1) |
| Capacitance range 1000 nF, 10 uF, 100 uF, 100 uF to 1000 uF with accuracy of +/-(1.9% 2), greater than 1000 uF with accuracy of +/-(5% 20) |
| 300 hr typical alkaline, without backlight |
| 3-3/4 digits 6000 count display |
| 300 hrs typical alkaline, without backlight |
| 3-3/4 digits 6000 count display |