PS, IEC, CONN, 4P5W, 30A 120/208V, W/T
Pin & Sleeve Connectors
350667
MFG #: HBL530C9W
Hubbell Wiring Device-Kellems
478.92000
/ ea
- Application: High Ampacity Connections
- ARRA Compliant: C
- Buy American Compliant: C
- Catalog Number: HBL530C9W
- Conductor Range: #12 AWG to #8 AWG
- Connection: Pressure Screw Terminal
- Country of Origin: PR
- Currency: USD
- Dimensions: 4.7 in Dia x 9.68 in L
- Enclosure: IP67
- Environmental Conditions: Watertight
- EU RoHS Indicator: Y
- Grade: Industrial
- Gross Weight Per Pack: 2.2000 lb
- Gross Weight per Pack Metric: 0.98
- Gross Weight UOM Metric: kg
- Harmonization Tariff Schedule Code: 8536694020
- Height: 4.60 in
- Height [Metric]: 11.6840 cm
- Horsepower: 2 hp
- Insulation: Insulated Body
- Length: 10.40 in
- Length [Metric]: 26.4160 cm
- Material: Composite
- Mounting: Cord Mounted
- NEMA Rating: Non-Nema
- Number Of Conductors: 5-Wire Grounding
- Number Of Poles: 4
- Returnable: Y
- Size: Standard
- Standard: CSA Certified File LR280C;UL Classified to IEC 60309-1 IEC 60309-2;UL Listed, File E146033
- Standards: UL 498IEC 60309-1/60309-2/309-1/309-2CSA Certified
- Sub Brand: Pin and Sleeve
- Temperature Rating: Maximum Continuous: 75?° C; Minimum Continuous: -40?° C w/o impact, -25?° with impact. °C
- Terminal Type: Pressure Screw
- Type: Watertight Connector Body
- UNSPSC: 39121421
- UPC 11: 78358540545
- UPC 12: 783585405452
- Width: 5.10 in
- Width [Metric]: 12.9540 cm
- Stock Status: NONSTOCK
- Brand: Hubbell Wiring Device-Kellems
- Manufacturer: Hubbell
- Amperage Rating: 30 A
- Color: Blue
- Number of Wires: 5
- Voltage Rating: 3 Phase Y 120/208 VAC
Hubbell® Pin and Sleeve Connector, Female, 120/208 VAC, 30 A, 2 hp, 4 Pole, 5 Wires, Grade: Industrial, IP67 Enclosure, -40 to 75 deg C, Screw Terminal, 801 Nylon/Zytel, Blue
- Catalog URL - HUBBELL_HBL460C7W_Catalog.pdf(Catalog URL)
- http://www.hubbell-wiring.com/(Seller Home Page URL)
- Install Instructions 1 URL - 11456_PDY5FZ2LGIMES1BW.pdf(Install Instructions 1 URL)
- Line Drawing URL - 11456_8VUKC3GE2PX7HTFO.pdf(Line Drawing URL)
- Spec Sheet URL - 11456_SA0B68Y37GXZR5CU.pdf(Spec Sheet URL)
- Tech Drawing URL - WIRING_HBL530C9W_M13306_ACAD_DRAWING.dwg(Tech Drawing URL)
- Warranty URL - 11456_Y8PS6T0FNOGH3Q75.pdf(Warranty URL)
- Warranty URL - Wiring_WDK_Warranty.pdf(Warranty URL)
- Applications
- Features
High Ampacity Connections |
Watertight |
Self-closing gasketed cover |
Super tough insulated non-metallic housing |
Watertight neoprene glad seal to prevent water ingress from entering at cable entrance |
Sequential contact engagement to prevent a momentary over-voltage |
Multi-contact spring provides and maintains high unit pressure on mating pins to minimize temperature rise |
Withstands 3000 VAC dielectric voltage |
Reinforced thermoplastic polyester covers and cord clamps |
Solid neoprene gaskets and glands |
8 to 2 AWG copper wire terminal accommodation |
Round portable service cords of diameters commensurate with the device rating as defined in UL standard 62, CSA C22.2 No. 49 and the harmonized European standards cord accommodation |
Terminals identified in accordance with North american and IEC conventions terminal identification, identification and ratings are a permanent part of the device housing product identification |
Watertight per IEC 60309-1 moisture resistance |
HB or better per UL 94 or CSA 22.2 No. 0.17 flammability |
Maximum 30 deg C temperature rise at full rated current after 50 cycles of overload at 150 percentage of rated current at a power factor of 75 percentage temperature rise |
5000 connect and disconnect cycles with load for 16 A and 20 A, 1000 cycles with load and 1000 cycles w/o load for 30 A, 32 A, 60 A and 63 A, and 250 cycles with load and 250 cycles with out load for 100 A and 125 A endurance |
Round portable service cords of diameters commensurate with the device rating as defined in UL standard 62, CSA C22.2 no. 49 and the harmonized European standards cord accommodation |
Terminals identified in accordance with North american and IEC conventions terminal identification |
Identification and ratings are a permanent part of the device housing product identification |
Watertight per IEC 60309-1 moisture resistance |
HB or better per UL 94 or CSA C22.2 no. 0.17 flammability |